Your Trusted Source for Automatic Door Sensors and Switches since 1979

E-2005 MS Sedco 
microStar Motion Sensor

The microStar M offers many features of the popular D38 it supersedes such as Human Presence Radar™ (HPR™), which offers unparalleled protection to even the slowest moving pedestrians from doors closing prematurely. The microStar M is the first motion sensor to feature an “installation mode.” In this mode, the installer can set the detection area without having to physically activate the door. Installation mode is especially valuable in times of bad weather, or when a large number of pedestrians are present. The microStar M fits 1¾” door frames, and includes visible LEDs to verify activation. Narrow and wide-pattern antennas are included, and the sensor offers multi-axis pattern adjustment (in/out and left/right). A wire harness is included to simplify (and quicken) installations. Like the D38, the microStar M can be set for unidirectional or bi-directional detection. (Supersedes prior units D7, D15 and D38)
 

Retail Price - $225   Erich Price - $176


Order 4 or More at $164 each
Order 10 or More at $151 each
Universal Mounting Bracket $25
Rain Cover $40

E-2030 BEA Falcon Industrial Motion Detector 

The Falcon is universally compatible with any industrial door.  Can detect traffic moving both towards and away from your industrial door.  Ability of disregarding pedestrians and only detect large masses.  Capable of disregarding parallel traffic. Mounting height 11.5' to 23'. Falcon models available for lower mounting applications 7' to 11.5 and extended width pattern.

Retail Price - $460   Erich Price - $235


Order 4 or More at $225 each
Order 10 or More at $215 each

Wide Pattern Version $251
Easy Programming Remote Control $35
100' Pre-Wire Cable $69

• AUTOMATIC DOOR SENSOR BROKEN?
• WORRIED ABOUT INJURY OR LAWSUIT?
• ALL OUR SENSORS ARE IN STOCK!
• ASAP DELIVERY WITH NEXT DAY SHIP OPTIONS
   

E-2020 BEA Eagle HM Motion Detector

Sophisticated Motion Tracking Feature when energy conservation is critical.  “3-D” adjustable antenna for precise positioning of the detection pattern . K-Band Microwave Technology . Exceeds ANSI standards and meets FCC req . Mounting height 10' - 17'. (10EAGLE, 10EAGLE1HM, 10ERA, 10ECA, 10EMB)

Please contact us for pricing on 10Eagle for lower mounting applications 7' - 10'.

Retail Price - $300   Erich Price - $231


Order 4 or More at $199 each
Order 10 or More at $169 each
Easy Programming Remote Control $35
Universal Mounting Bracket $18
Rain Accessory Cover $39
Recessed Ceiling Adapter $36

1st Place Winner Most Innovative Products

Our High Volume =
The Lowest Prices Anywhere
Meet or Exceed All ANSI / BHMA
A156.19 and ANSI 156.10
Regulatory Requirements  
All New Units - Never Rebuilt - No eBay
The Industry Leader Since 1979
 

E-2035 MS Sedco ID20 Industrial Door Activator

The ID20 is a long range microwave motion sensor for activating automatic industrial doors. Features include a speed selectable switch that makes the unit capable of detecting pedestrians and/or vehicles. Detection mode is selectable between approach-only or depart-only motion and the weatherproof housing makes it ideal for exterior applications. Microwave technology allows the ID20 to detect larger objects, such as fork trucks, up to 60 ft. away. Maximum pattern size is approximately 18 ft. wide at 60 ft. from the unit and is adjustable via a range potentiometer on the printed circuit board. The ID20 is not affected by air motion, change in temperature, humidity, color or background variations and is an ideal alternative to in-ground loop detectors.

Retail Price - $575   Erich Price - $406
Heavy Duty Rain Cover $68

E-3090 MS Sedco DH400 Active Infrared Presence Sensor

The DH400 is a high mount active infrared presence sensor designed to provide both activation and safety protection for automatic sliding and folding doors. The DH400 is based upon the most reliable active infrared (AI) technology available—Floor Reflection Method (FRM). With FRM-AI up to 60 individual detection zones (floor points) are precisely reflected off of the floor in a rectangular pattern meeting and exceeding ANSI A156.10 guidelines. The DH400 provides detection as far as 13.1 feet (4m) from the door while simultaneously providing a dense zone of presence detection at the threshold of the door. With a sensing area made up of 60 separate detection zones, the DH400 provides the highest density pattern available. (Supersedes prior units D14-1, D14-2, DH97, DH94D and DH98i)

NOTE THIS PRODUCT REPLACES ALL PREVIOUS VERSIONS OF MS SEDCO DH97, DH94D and DH98i

Retail Price - $340   Erich Price - $258
Universal Mounting Bracket $47
Rain Cover $37

E-3045 BEA IXIO-ST Safety Sensor

BEA’s IXIO-ST Industrial is an extremely effective, versatile and easy-to-use safety sensor for interior industrial doors, automatic sliding doors and off door industrial automation.  Precise infrared curtains coupled with visible alignment beams make the IXIO-ST Industrial extremely safe and easy to adjust. This state-of-the-art sensor features an onboard LCD screen that streamlines the installation and setup processes.  The IXIO-ST Industrial has earned a comprehensive list of additional credentials and certifications, including UL, FCC, and IP54. NOTE: IXIO-ST Standard Model available. 

• Sidelite protection reduces liability
• Two 24 spot, high-density, infrared safety curtains providing precise presence detection
• Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
• Intelligent programming and troubleshooting via a menu-driven LCD
• Onboard microprocessor optimizes data analysis, monitors sensor performance and enables system integration (10IXIOST, 10IXIODT1, 10IRIS, 10IRISI)

NOTE THIS PRODUCT REPLACES ALL PREVIOUS VERSIONS OF THE BEA IRIS

Retail Price - $570   Erich Price - $238

Order 4 or More at $212 each
Easy Programming Remote Control $35
Weather Protection Cover $68

E-2070P BEA IS40P Industrial
Infrared Presence Sensor
 

Overhead presence sensor for industrial environments utilizing infrared detection technology. The IS40P is universally compatible with any industrial door. Impervious to door vibrations, light, sun and the environment; including rain and snow. The IS40P housing is rated NEMA-4. Can be mounted between 8 to 16ft.

 Retail Price - $645   Erich Price - $334


Order 4 or More at $304 each

If you are not sure what sensor you require, refer to our  Door Sensor Knowledge Center. Our AAADM certified inspector is also available for your questions at 800-882-5839 Ext. 707.

 Sentry Post™ Door Activation and Safety

Award winning industrial door activation and hold open safety device. Wired into the door controller the SentryPost will detect forklifts, pallet jacks, people and other objects. Once detection occurs the door will be sent to the open position and remain open until detection ceases. Available as stand alone 40" bollard or clamp onto existing bollard 12" versions with one (1) OR (2) safety photoeyes. Photo eyes inside the bollard are adjustable so that the detection field can be more precise. The photo eyes used can also be adjusted to detect from 1′ to 10′ away. The eyes “see” through a narrow slot at the top of the bollard, +/- 36″ above the floor. Optional flashing yellow light on top cover activates when detection occurs and has an adjustable timer relay.

E-3085 BEA LZR-Flatscan Door Mounted Safety Sensor

BEA’s LZR-FLATSCAN SW is a LASER-based time-of-flight presence sensor for use as a stand-alone safety sensor on automatic pedestrian swing doors. This solution can also be used as a reactivation sensor on the approach side of low energy doors. This superior technology generates 170 detection points across a single curtain, which allows LZR-FLATSCAN SW to cover the entire face of a single door leaf including the hinge area. Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door, protecting hands and fingers while the door is in motion. The LZR-FLATSCAN SW is capable of exceeding the 156.10 section 8.2.2.3 standard for detection area and meets section 8.1.4 for monitoring. (10LZRFLATSCAN-SWB)

• Detection area extends beyond the leading edge of the door for enhanced safety
• LASER technology provides a reduced uncovered zone of down to 3/4 inch
• Easy door width programming using Hand Gesture Setup™ reduces configuration time
• Hub-less system offers fewer components for easier setup and installation

Retail Price - $1400   Erich Price - $990

E-3075 BEA LZR-i30 Industrial 
Laser Presence Sensor
 

 Retail Price - $1980   Erich Price - $1161

E-3036 MS Sedco SSS-5M1
Door Mounted Safety Sensor

The SafePath SSS-5 is a door mounted presence sensor designed to provide safety protection for any swing, bi-fold, revolving and low energy automatic doors. On swing doors, while the door is opening, the SSS-5 will sense and protect a person in it’s path and either slow or stop the door. When the door is closing, the SSS-5 will sense a person in it’s path and reopen the door. The SSS-5 combines the most reliable active infrared technology available with Position Sensitive Detection (PSD) technology found in auto focus cameras to ensure precise pedestrian detection within the path of a moving door panel. The SSS-5 mounts on either side or both sides of a door panel depending upon the application. They can also be used to stand alone or in conjunction with other sensors for complete swing door safety.

• Provides pedestrian safety protection within the path of moving swing, bi-fold and revolving doors
• Combines active infrared and auto focus position sensitive detection (PSD) technologies for precise and reliable detection.
• Mounts at top of door to eliminate potential damage from shopping carts and hospital beds
• SSS-5M1 model is appropriate for variety of applications
• Work with any manufacturers automatic door operator
• Adjustable detection angle, distance and width

SafePath SSS-5M1
Retail Price - $480   Erich Price - $336

E-3080 MS Sedco AccuGuard HP2 Safety Beam System

The AccuGuard HP2 is an active infrared 2-beam safety system for use with any automatic pedestrian door. This modular system consists of a separate control module, two transmitter beam heads with cables and two receiver beam heads with cables. Erich Industries includes the surface mount housings. When a beam is interrupted the control module signals the door to open. In the event of a power loss to the AccuGuard HP2, it will signal the door to open thus providing a failsafe system. The AccuGuard HP2 is designed to save money on door preparation. It also provides for easier installation, quicker change-out and better aesthetic value.

• Active infrared beam ranges up to 32 feet
• Control module mounts separately in header
• Recess mount or surface mount beam heads
• Two (2) beam sets per control module
• Cable for beam heads included
• Wire connections made at external screw-type terminals on control module—beam heads are plugable
• Beam status leds (assist in troubleshooting)
• Use in compliance with ansi/bhma a156.10

Retail Price - $205   Erich Price - $181

Order 10 or More at $159 each

E-3060 MS Sedco GD11S Infrared Safety Photocell
 

The GD11S is a self-contained surface mount active infrared safety beam system for interior or exterior use on any automatic pedestrian door, industrial door or gate. When the infrared beam is interrupted, the GD11S relay output signals an industrial door or gate control to open, stop or reverse. This is now a requirement of ANSI A156.10 2005. In the event of a power loss to the GD11S, the relay changes state (failsafe). The GD11S is supplied by Erich with the GDB quick mounting brackets for easy installation on industrial doors and gates. (GD11-GDB, GD11S, GDB)

Retail Price - $170   Erich Price - $141

E-2090 MS Sedco DHR3 Combination Activation and Safety Sensor

The SafePath™ DHR3 is a combination microwave and active infrared motion/presence sensor designed to provide both activation and safety protection for automatic sliding and folding doors. The DHR3 is based upon the most reliable active infrared (AI) technology available—Floor Reflection Method (FRM). The DHR3 provides motion detection as far as 10.5 feet (.3.2m) from the door while simultaneously providing a dense zone of presence detection at the threshold of the door. The DHR3 is designed for easy field installation and adjustment. The pattern width and depth are both mechanically adjustable. In addition, the depth can be altered electronically from 5 to 2 rows. All adjustments are available without the use of proprietary set-up devices. 

Retail Price - $320   Erich Price - $237
Mounting Bracket $47
Rain Cover $37

E-2080 BEA IXIO-DT1
 Combination Activation and Safety Sensor

The BEA IXIO–DT1 combines microwave radar technology for the activation of the door with infrared technology for pedestrian safety. The unidirectional radar provides energy savings and an infrared curtain prevents the door from contacting pedestrians as they pass through the threshold. The IXIO-DTI is an easy-to-use, all-in-one sensor that maximizes safety and activation. NOTE: IXIO-DT1 Industrial with 30' pre-wire cord available as a user-friendly solution for interior industrial doors, vehicle gate detection and off door automation. (10WIZARDG3, 10IXIODT1, 10IRA, G3-I)

NOTE THIS PRODUCT REPLACES ALL PREVIOUS VERSIONS OF THE BEA WIZARD

Retail Price - $570   Erich Price - $267

Order 4 or More at $253 each
Order 10 or More at $212 each
Easy Programming Remote Control $35
Weather Protection Cover $36

E-2070 BEA IS40 Industrial
Motion and Presence Sensor

Overhead activation and presence sensor for industrial environments utilizing microwave and infrared detection technology. The IS40 is universally compatible with any industrial door. It has the ability to disregard pedestrians and only detect large masses and can detect traffic moving both towards and away from the door. Impervious to door vibrations, light, sun and the environment; including rain and snow. The IS40 housing is rated NEMA-4. Can be mounted between 8 to 16ft. IS40XL model available for lower mounting applications 6.5' to 11.5'. For lower mounting heights, BEA’s IS40XL can be mounted from 78 to 138 inches (6.5 ft × 11.5 ft).

Retail Price - $875   Erich Price - $363


Order 4 or More at $352 each

If you are not sure what sensor you require, refer to our  Door Sensor Knowledge Center. Our AAADM certified inspector is also available for your questions at 800-882-5839 Ext. 707.

E-3095 BEA LZR-Widescan Industrial
Combination Sensor

BEA’s LZR-Widescan is a LASER-based, time-of- flight sensor used for motion, safety and presence detection in a variety of industrial door applications. This all-in-one solution offers the benefits of activation and safety, while reducing installation time. This NEMA 4 rated sensor creates a volumetric detection area by generating seven angled LASER curtains. It has the ability to detect objects based on direction, speed, object size and height. The LZR-Widescan detection field operates independent of ground conditions, allowing for superior functionality in harsh environments.  (10LZRWIDESCAN)

• Ideal for replacing costly / labor-intensive induction loop and pull-cord solutions
• Promotes energy savings by reducing false detections / unnecessary door cycling, helping to regulate HVAC
• Virtual pull-cord function can differentiate between pedestrian and vehicle traffic and can provide pulse-on-stop activation
• Two visible LASER alignment spots ensure accurate pattern placement

Retail Price - $1500   Erich Price - $996
 

E-2050 MS Sedco DH100 Combination Activation and Safety Sensor

The DH100 is a combination 2-row motion, 3-row presence sensor designed to provide both activation and safety protection for automatic sliding & folding doors in a single device. The DH100 is based upon the most reliable active infrared (AI) technology available—Floor Reflection Method (FRM). With FRM-AI up to 40 individual detection zones (floor points) are precisely reflected off of the floor in a rectangular pattern meeting and exceeding ANSI A156.10 guidelines. The DH100 provides motion detection as far as 7 feet (2.2m) from the door while providing a dense zone of presence detection in close to the door. With a sensing area made up of 40 separate detection zones, the DH100 provides the highest density infrared setting area available for combination motion and presence detection.

Retail Price - $310   Erich Price - $237
Rain Cover $37

Back to Top of Page

E-3060 MS Sedco DH17i Industrial Motion or Presence Sensor

The DH17i is a high mount 4-row selectable motion or presence sensor designed to provide either activation or safety protection for industrial doors. The DH17i is based on the most reliable active infrared (AI) technology available—Floor Reflection Method (FRM). With FRM-AI up to 24 individual detection zones (floor points) are precisely reflected off of the floor in a rectangular pattern. The DH17i provides motion or presence detection as far as 20 ft. (6m) from the door and mounts between 10 ft. (3m) and 20 ft. (6m) off the floor. It is an ideal alternative to in-ground loop detectors.

Retail Price - $590   Erich Price - $416

E-5020 BEA MS08 Touchless Magic Switch

BEA’s MS08 utilizes proven microwave motion technology to ensure consistent, dependable touchless activation and can be adjusted to comply with the ANSI 156.10 knowing act standard. The MS08 detects moving objects such as a hand, cart or wheelchair and is ideal for use in hospitals, pharmacies, clean rooms, food service facilities and other applications requiring a hygienic activation method. Adjustable detection range from 4 - 24". Includes black single and double gang face plates with "Wave to Open" text and artwork. (10MS08U)

• Detection zone from 4 to 24 inches (pulse or toggle)
• Low profile, beveled design reduces chance of accidental damage in high traffic areas

Retail Price - $230   Erich Price - $199


Order 10 or More at $129 each

E-5010 MS Sedco 216 Series Infrared Touchless Switches

The 216 Series "touchless" switches are active infrared devices designed to activate full and low energy automatic doors. Hands-free operation makes these switches ideal for handicap accessibility and Knowing Act Doors. Other applications include bathroom door and clean room door activation where a sterile environment is needed. FACEPLATES AVAILABLE WITH LEGEND OR PLAIN

Retail Price - $215   Erich Price - $159

E-4020 & E-4030 MS Sedco 59R Series Stainless Steel Push Plates
 

The 59R Series switches combine architectural quality finishes with industrial grade components to provide attractive and reliable automatic door activation. The 59R Series features 4.5" or 6" round face plates in either stainless steel with an etched and paint filled legend or blue powder coated aluminum with an engraved legend. A 4.5" or 6" square formed stainless steel back plate eliminates possible wall damage from standard use.

4.5" Retail Price - $62   Erich Price - $56
6" Retail Price - $75   Erich Price - $68

If you are not sure what sensor you require, refer to our  Door Sensor Knowledge Center. Our AAADM certified inspector is also available for your questions at 800-882-5839 Ext. 707.

E-1010 Heavy Duty Push Button Switches

Exterior or Interior Applications
Momentary Contact
U.L. Rated 4, CSA Certified
Meets 1, 2, 3R, 4, 5, 6, 12, 13, and ICS NEMA Standards

1BX - Erich Price - $59
2BX - Erich Price - $69
3BX - Erich Price - $116


 

E-6010 CP2 & WP1 Heavy Duty Pull Cord Switches

Die Cast Aluminum Construction
Momentary Contact
U.L. Rated 3R, CSA Certified
Meets 1, 2, 3R, 4, 5, 6, 12, 13, and ICS NEMA Standards
 

CP2 Ceiling Mount  - Erich Price - $92
WP1 Wall Mount - Erich Price - $92

Back to Top of Page

Erich Industries has been exceeding customer expectations since 1979. Our goal is to perform in this manner for you.